Default
Google
AVENGER GALLERY
SEE A WRECKED 1998 & OTHERS     TRUNK FULL OF AUDIO     PRO RACE CARS
 IROC AVENGER     CAMERO LOOKING SEBRING
1971 SATELLITE SEBRING
AVENGER WITH H.I.D. REVERSE LIGHTS
MY NEW BADGING PROJECT        MY 12" SUBS & KENWOOD AMP
CD CHANGER & AMP         INTERIOR MODS & LIGHTING
MY VORTEX STRUT BRACE, AND LOWER TIE BARS
MY INTAKE (4/4/2004)    CAI INTAKE (5/28/2004)   WITH SHIELD (6/4/2004)
MY EXHAUST    STROBE LAMPS    CLEAR CORNERS     VENTVISORS
MISC O.E.M. PARTS VIEWS
TRICKED OUT AVENGERS!     AN AVENGER INTAKE?
MY PERSONAL GALLERY
  
LEFT - This is the front view with the Blue LEDs installed on the "grille". They are 1/4" in Diameter, and are very bright at night.
This picture taken at dusk.
  RIGHT -  is with the White Illuminator attached to the Signal Lens. You can also notice the Bug & Stone Deflecter.
The Directions for installing the LEDs, tell you to drill a 1/4" hole, that is incorrect.  I had to use a piece of rubber, inserted first, then screw the lights in.
 
Added Whites on the Front Signals - DAY and NIGHT View
This is a Rear View with the same type of LED installed on each side.
They are also much brighter at night.
These holes were drilled just below 1/4", and they screwed in nice and tight.

Night View with added brake and Signal lights on the sides of the Rear Window
 
This is the flashing brake mod.
I installed a red LED in the center of the light, that is solid on with the brake.
The OEM bulbs flash on both sides
I could not get the still with OEM bulbs totally off, but will keep trying to capture the picture.
This is the OEM logo with my added Starfleet "Arrow Head" Symbol attached.
MY NEW BADGING PROJECT

Removed all Dodge Badging and went with Klingon symbols, and are waiting for the graphics to be primted.  They will replace the Original DODGE badging letters, but will be in klingon.  Also, I changed the small red LEDs  with new ones.  The LEDs in the pics above are smaller.

4/20/2004



SIDE VIEW
MY SUB-BOX
  
Dual 12" 450+ Watt Air-Cooled Subwoofers in a 4th Order Bandpass Enclosure.
Kenwood 400 x 4 Amp, Bridged 200 x 2.
CD CHANGER & 200WATT OPTIMUS AMP
 
The Sony CD Changer and Optimus Amp are mounted on the back of the rear seats.
You an see the 250Hz Crossovers (Caps) in the left picture.
Some of the other wires are from the Sirrius Sat. Radio System
INTERIOR MODIFICATIONS
 
Left:  Installed push button switches for the 4-Channel wired switch box.  I only had to use 5 wires, one common runs through each terminal on the switch (White/Blue), then four wires to the box (Blue/White, Orange/White, Green/White, Brown/White)
Right: Red Flexible LED Sticks monted to the back quarter windows.


This is the right side Rear Window Brake/Signal RED LED.  There is one on the other side as well.
I use AIC Poduct for most of my LED Work.
MY INTAKE (REVISED 4/20/2004)

Stainless Steel Filter
I made the bracket myself.

FULL VIEW:

REAR STROBE LIGHTS
 
CLEAR SIGNAL LAMPS
 
HOME BREW CAI
 

I used an intake tube from a 94-99 Mistu-Eclipse I4 and fit it as best I could.
Looks a little to low to me, but there is NO place else for it, I tried to move and shift it to other positions.
Anyhow, it has improved pickup.  I went WOT at the same place I do every day, and end up at about 80+
MPH by the time I reach the top of the hill.  Today?  I approached 100!  A noticable difference.

ADDED A SHIELD
 
It looks lower than it really is. I suppose I am going to have to cut an inch or so from the aluminum tube, then use a coupler so I can raise it up an inch.
VENTVISORS

Got these locally for 29.99! 
No more water leaks around the mirrors anymore!

Acquiring image from ProHosting Banner Exchange